Almost certainly, you’ll need to take out the drawers from one of your cabinets, dressers, or other similar pieces of furniture at some point. Taking out the drawers is usually the first step, whether you need to move the furniture and make it lighter before moving it, clean it out, or make a quick repair. Even though taking out drawers is usually easy, the way you do it can change depending on the type of drawer slides you have. Here are the steps for taking out drawers with the most common types of drawer slides.
No matter where the problem is coming from, you have to take the drawer out to find it and fix it. Here are a few ways to take out different kinds of drawers and drawer slides.
Drawers do sometimes get stuck. At some point, the drawers in your kitchen cabinets, dressers, end tables, and other pieces of furniture may get stuck.
This could be because the under-mount drawer slides need more oil or are getting rusty. Heat could have caused the wood on the sides of the drawer to expand and get stuck. The drawer might be tilting because a screw on the mounting plate has come loose.
It could be a dresser, a cabinet, or something else similar. When you need to take drawers out, you should try to avoid situations that don’t make sense.
You might be surprised at how hard it is to answer a question like “How do I take out my desk drawers?” Desks have different kinds of drawers, so you need to follow the instructions for the type of drawer you have. Some require special techniques or equipment.
If you know how to take out the drawers of a dresser, you might find it easier to clean or move the piece. It can be hard to move bigger pieces of furniture, like a dresser.
Most furniture comes with metal glide drawers, which are easy to get rid of. No matter what kind of drawers you have, you should always take out the top drawer first so that your nightstand or chest of drawers doesn’t get too heavy at the top. Slide the drawer out as far as it will go while standing in front of the piece of furniture. Look for the track levers, which are in the middle and on either side of each track. Pull the drawer toward you while simultaneously pushing down on both levers. It should be simple to get rid of.
How do you take drawers off metal slides that don’t have levers?
If there are no buttons or levers, gently push the drawer out. Just lift it up until you hear a click. Using the putty knife, remove any debris from the rail that might be blocking the slide if it is stuck or broken.
What makes a drawer slide unique?
From the back of the box, measure to the front of the box, leaving out the front of the drawer. Once you know how long it is, round it down. If the drawer is 20.12 inches long, you will need 20-inch drawer slides.
How are side mount and bottom mount drawer slides different?
Side mounts are attached to the sides of the drawer and the cabinet. Drawer bottoms and cabinet sides are held in place with bottom mounts. Undermounts, on the other hand, are two slides that are attached to the side of the cabinet and the bottom of the drawer (which is hidden).
Which is better: drawer slides that go on the side or under the drawer?
Undermount slides have two advantages over side-mount slides: they are completely hidden under the drawer, and they give you a little bit more drawer space because they don’t need as much clearance on the sides.
How do you take drawers out of furniture?
Slide the drawer out as far as it will go while standing in front of the piece of furniture. Look for the track levers, which are in the middle and on either side of each track. Pull the drawer toward you while simultaneously pushing down on both levers. It should be simple to get rid of.
How do you get the drawers out of a Steelcase lateral file cabinet?
Press down on the lock catch on each side of the drawer as needed to pull it out. Pull the file drawer on the side out until it stops. As shown, pull the drawer up and out while pressing down on the lock retainers on each side of the drawer.