Letter-size vertical cabinets are 15 inches wide, while legal-size vertical cabinets are 18 14 inches wide. A standard office file cabinet is 28.12 inches deep and has a drawer that can hold files up to 27 inches long.
The wide but shallow drawers of a lateral file make it a good choice for filing a lot of papers. Because lateral files have short drawer extensions, they are great for hallways and other places where a lot of filing needs to be done in a small space. Most lateral files are between 32″ and 36″ wide, which is big enough to hold letter- and legal-sized papers that can be put back to front or side by side. Most units with two drawers are thin enough to fit under a work surface. There can be as few as two drawers or as many as seven drawers in a lateral file.
If you already have a drawer that is the right size, you can use it instead of making a new one. Follow my simple drawer instructions if you want to make a new one, but change the size to fit the files. My drawer is 14″ wide by 10″ deep. When building your cabinet, make sure to leave 1″ of space above the top of the file drawer so that the hanging file tabs can clear the faceframe or drawer above the files.
A basic vertical file cabinet in an office is 28.12 inches deep and can hold files that are up to 27 inches long. There are also shallower cabinets, such as 25-inch-deep cabinets with 23-inch-deep drawers and 26-inch-deep cabinets with 25-inch-deep drawers. When uninformed customers compare prices, they often compare units with shallow and deep drawers by accident.
The width of a legal sheet is 18 14 inches, and the width of a letter size page is 15 inches. The overall depth of a standard vertical file cabinet is 28.12 inches, and each drawer can hold up to 27 inches of files. Some vertical file cabinets are only 26.12 inches deep, and the drawers are only 23.12 inches deep. So, before you buy a new vertical file cabinet, you should think about what you need.
Usually, the width and depth of a vertical file drawer is between 15″ and 20″. Vertical files usually hold fewer documents and are better for daily use at a personal workstation. Lateral files, on the other hand, are better for long-term use with a lot of documents. Vertical files take up less wall space than lateral files, but deep drawers need more room to open than shallow ones.
Between 400mm and 750mm is a good depth range for vertical file cabinets. Between 400mm and 750mm, or 15.74 inches and 29.52 inches, is a good depth range for lateral file cabinets.
What should the size of a file drawer be?
letter-sized document Drawers need to be exactly 12 15/16″ wide for wood that is 1/2″ thick and 13 3/16″ wide for wood that is 5/8″ thick. Due to the thinner material, Baltic birch file drawers should be exactly 12 7/8″ for 9-ply and 13 1/8″ for 11-ply. For legal-sized files, the drawers must be 15 15/16″ deep for things that are 1/2″ thick and 16 3/16″ deep for things that are 5/8″ thick.
How big is a file drawer on average?
A basic vertical file cabinet in an office is 28.12 inches deep and can hold files that are up to 27 inches long. There are also shallower cabinets, such as 25-inch-deep cabinets with 23-inch-deep drawers and 26-inch-deep cabinets with 25-inch-deep drawers.
What should the right height of a file drawer be?
The minimum recommended height for the inside of a drawer box is 9-1/4 “. Based on the thickness and inset of the bottom, minimum heights for the outside of the drawer box are suggested.
How wide is a filing cabinet for legal-size papers?
Storage capabilities Legal documents are 8-1/2″ x 14”. Side-by-side filing, which is also called “left-to-right filing,” is when folders are lined up from left to right. As was already said, this is the most common way to put hanging folders that are letter size in lateral files and folders that are legal size in vertical files.
How long are legal documents?
You can use these folders on their own or as a part of a filing cabinet system. They put documents into groups and organize them. Dimensions Guide says that the front of a legal-size file folder is 14 3/4 inches wide and 8 5/8 inches tall, and the back is 9 5/8 inches long.
What sizes of file folders are there?
One example is shown in Figure 7a. When folded along the primary score line, the front and back flaps of a letter-sized file folder must be 8 5/8 inches tall, 9 5/8 inches tall, and 11 3/4 inches wide.
How far does a two-drawer file cabinet go?
The 18 “The Deep 2-Drawer Metal File Cabinet was made to be used at home or in a small office.
A vertical file cabinet or a lateral file cabinet?
Unlike lateral file cabinets, vertical file cabinets are not as big. Even though vertical file cabinets are common because they take up less wall space, most paperwork is kept in lateral file cabinets.
What does a lateral file drawer look like?
Labels on the side of a file help you find lateral files, which are set up horizontally instead of vertically. They can be put on open shelving systems and don’t need drawers. Files are put and taken off shelves by dragging their edges.
How big are manila folders?
The 8-inch law The folders are 1/2 by 14 inches and have a 1/3 cut tab. They are best for sheets that are a little bit longer. There is a pack of 100 manila file folders that can be bought.
How deep is the average file drawer?
A standard office file cabinet is 28.12 inches deep and has a drawer that can hold files up to 27 inches long. Some cabinets, like a 26 1/2-inch-deep cabinet with a 25-inch-deep drawer, are shallower. There is also a file that is 25 inches deep and has 23 12 inch drawers.
What sizes of file folders are there?
One example is shown in Figure 7a. When folded along the primary score line, the front and back flaps of a letter-sized file folder must be 8 5/8 inches tall, 9 5/8 inches tall, and 11 3/4 inches wide.
How deep is a side-by-side file cabinet?
For letter or legal size folders, these cabinets are usually 12 inches (300 mm) or 18 inches (460 mm) deep. They come in the same widths as lateral files—30 inches (760 mm), 36 inches (910 mm), 42 inches (1,100 mm), and 45 inches (1,100 mm)—but they are usually only used in 5-high and 6-high applications.