How do you hide the power strip under the desk?

Spread the love

underneath a desk Buy a couple of command strips that are sticky on one side and glue them to the back of the power strip. Then, remove the backing from the other side and stick it to the bottom of your desk.

We’ve made hiding computer connections as easy as possible. So, this cable tray is good for keeping computer connections organized, and it’s not too hard to put together without drilling. It is made of strong steel that won’t rust. It can hold up to 35 pounds and has room for a power strip and a lot of wires.

If so, there are many creative ways to hide the cords and cables on your computer desk and keep your work area clean. There are ways to keep your computer cords from dangling, such as under-desk racks, cable boxes, cable ties, and even stick-on clips that keep your chargers close at hand.

You might already have a small home office desk (or you might have gone all out and bought a standing desk), a good office chair, and even a few desk accessories.

But what about the ugly tangles of cords, chargers, and power strips? Even if they are just there to make your place look better, you shouldn’t ignore the less interesting decorations in your home office.

Even though you’ve set up a great place to work, the underside of your desk looks like Medusa’s hair on a bad day. A professional workstation may have a lot of connections between speaker wire, power cables, and the big surge protector into which everything is plugged. Use these three ways to store them to keep your space clear of clutter.

We put the TV on top of an old cabinet where we keep our modem, Apple TV, and some other things. All of these gadgets are connected to a power strip that is plugged into the wall. The idea is to keep the power strip inside the cabinet instead of letting it hang behind the media console. Holes have been drilled in the back of the cabinet for the cords and for air flow. (Hint: I always turn the modem backwards when I restart it because it’s easier.) We put the router on top so that the internet doesn’t slow down.

The location of your power strip is an important part of how your desk’s cables are set up. The first thing that comes to mind is to plug it into the nearest outlet and start plugging things in. But if your surge protector is set up correctly, it will be much easier to manage your cables.

This is always the best place. By putting your surge protector behind it, you can hide all of your power connections under your desktop, which is one of the best places to hide things.

Managing the cables on a desk is like cleaning a room. Right now, it’s a pain, but when you’re done, it will almost feel good. It’s not as simple as just vacuuming and putting things away. For proper wire hiding, you need a plan and at least a few hours to work on it.

One of the hardest things to keep organized at your workstation is the surge protectors and power strips. This combo tray and able spool will keep everything in order. The Quirky Plug Hub is better than some of the box ideas below because it coils excess lengths of multiple power cords and keeps the plugs easy to reach.

How do you conceal computer cables? was one of the most-asked questions after I showed where I worked last fall (HERE). Here’s where I’ll start. When planning the layout for this area, I gave the desk and cords the most attention. This is one of the main reasons why so many people put their desks against a wall. But I knew I needed built-ins and a desk in the middle of the room, so I was motivated to find a solution. My shelf builder and I talked for a long time about what should be done. Please add an outlet for the floor. I didn’t want to say that because I didn’t know if this room would ever be used as an office again. Why not turn the cords around and put a plug under the file drawers? I didn’t want to throw them out like trash. Finally, we talked about it and decided that no major changes to the electrical system were needed. So, how do you hide computer cords when your desk is in the middle of the room?

Most of the time, power wires are neutral, plain colors like white or black. Even if these colors clash with the rest of the room’s decor, this is probably not what bothers you the most about them.

When loose ropes are tied to the shadow of the nearest piece of furniture, they disappear quickly. Attach clear cord clips, like these Command Cord Clips, to the back edges of your furniture to do this. Like the rest of 3M’s renter-friendly products, you have to hold the clips in place for 30 seconds before you can connect one or more cords and have them neatly run down the legs of the console an hour later. (These hooks are also wonderful for hiding charging cables and cords at your workstation!)

If you make a few smart changes to a desk drawer, you might be able to hide a big power strip that is sitting on the floor and is full of cords. Using a power drill and a hole saw bit, drill a hole in the back panel of the desk drawer near a wall outlet. The power strip cable should then be put through the hole, and the power strip should be glued to the same drawer panel on both sides. As you plug electronics into the power strip, designate a location in the drawer for each device to rest while charging, as home blogger Jenny Steffens Hobick does in her kitchen drawers.

Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *